#Cuisinart blender parts dealer how to

Once the pitcher is full, remove the funnel and put the lid on. Then, increase the flow until the water is coming out of the spout as fast as you can pour it. Pour the water slowly at first until the funnel is full.

If you don’t have a funnel, you can make one out of a piece of paper. The best way to do this is to use a funnel, which will help prevent spills. Once the pitcher is in place, it’s time to fill it with water. If it is not attached properly, it could come loose and cause hot coffee to spill everywhere. Once the pitcher is in place, tighten the lid securely. Make sure that you do not force it, as this can damage the inner workings of your coffee maker. Next, take the pitcher and gently insert it into the machine. If you want to use a lower speed, press the “low” button. The blender will start at a low speed and then increase to a high one. Plug the power cord into an outlet and press the “on” button. Plug in the Blender and Press the “on” Button. Make sure that the gasket is properly in place before attaching the blade assembly to the pitcher. The rubber gasket helps to create a tight seal between the pitcher and the blade assembly. Once the blades are in place, screw on the bottom (or the pitcher, if you’re using the third method), be sure to screw it on tight, so the blades don’t come loose while you’re blending. If they’re not, they won’t blend the ingredients properly.

The blades should be pointing away from the spout and towards the handle. If they’re not, they won’t blend the ingredients properly.įor the third method, make sure the blades are pointing in the right direction. The blades should be pointing away from the handle and towards the spout. For the first two methods, make sure the blades are pointing in the right direction. The third is to insert the blades into the bottom, then screw on the pitcher. The second is to screw the bottom onto the pitcher, then insert the blades. The first is to insert the blades into the pitcher, then screw on the bottom. There are three ways to do this, depending on the model of blender you have. The next step is to attach the blades to the bottom of the pitcher. Instead, use a clean, dry cloth to wipe down all blender parts, including the base, jar, lid, and blades. Any water left on the parts can cause rust or corrosion, damaging the blender and making it unsafe to use. It’s important to make sure all Cuisinart blender parts are completely dry before assembly. Just be sure to use a mild detergent and remove the parts immediately after the cycle is complete to prevent them from rusting. You can also run the parts through a cycle on the top rack if you have a dishwasher. Be sure to pay special attention to the blade assembly, as this is where most food particles and bacteria will accumulate. Rinse well and dry thoroughly with a clean towel. Wash All Parts in Warm, Soapy Water.Ĭarefully wash all parts of the blender in warm, soapy water. If they are not, the blender will be very unstable. Make sure that the feet are pointing in the right direction so that the blender can stand on its own. Once you have gathered all of your materials, begin by attaching the blender’s base to the motor. You will also need to gather all of the parts and accessories that came with your blender and a Phillips head screwdriver.

Start by finding a flat surface on which to assemble your blender.

#Cuisinart blender parts dealer how to

Make Perfect Coffee at Home | How to Make a Cappuccino | Perfect Coffee 1.